Minimate- Printer pairing and setup

How to setup a printer to print from Minimate

This may vary depending on Model and Android version.
1) Enter Settings on your handheld

2) Enter Bluetooth, turn it on and Scan for new Devices

3) Select Printek printer to pair:

4) Enter in Printek Pin: 0000 (or 0)

5) Press OK.

1. Select printer in MiniMate application:
- In the MiniMate application, tap on ‘Settings’

2. At the bottom of the ‘Settings’ screen, tap on the box below ‘Default Mobile Printer’.

3. The ‘Select BT Device’ screen will be displayed; select the serial number for the
printer

4. Tap on ‘Apply’, and the printer’s serial number will be displayed in the box below ‘Default
Mobile Printer’

5. Check ServQuest MiniMate Configuration

5.1 Indicate the specific driver in the Driver column, and only add the printer_model if using a different model then save.

6. Try to print again using MM

7. Refer to the printer model guide for specific instructions:

If the printer is: